http://www.k-wave.org/forum/topic/how-to-handle-the-two-sensors-data-in-the-same-simulations Support for the k-Wave MATLAB toolbox en-US Wed, 13 May 2026 01:34:36 +0000 http://bbpress.org/?v=1.0.2 q http://www.k-wave.org/forum/search.php http://www.k-wave.org/forum/topic/how-to-handle-the-two-sensors-data-in-the-same-simulations#post-5039 Wed, 08 Apr 2015 16:33:12 +0000 bencox 5039@http://www.k-wave.org/forum/ <p>Hi JOKEjoe,</p> <p>I'm not quite clear what the problem is. The output <code>sensor_data</code> will have size (number_of_sensors x number_of_timepoints), so row 2, for example, will contain the time series recorded at the second sensor.</p> <p>Ben </p> http://www.k-wave.org/forum/topic/how-to-handle-the-two-sensors-data-in-the-same-simulations#post-5033 Wed, 08 Apr 2015 13:46:04 +0000 JOKEjoe 5033@http://www.k-wave.org/forum/ <p>in the last simulation,i realize that one sensor receives two sources' signals and recover the two signals from sensor_data by means of filter.Then, i try to set two sensors(1 and 2) and four sources(a,b,c and d),and i want to sensor1 receives and recovers the signals from source a &amp;b,and sensor2 receives and recovers the signals from source c&amp;d.but there is only one data save in the sensor_data,i don't know how to obtain the each data of sensor1 and sensor2.</p> <p>i wish there are someone can help me. </p>